Powerboat Forums at SpeedWake banner
1 - 6 of 6 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
I want to put a lab finished prop on my 22 Advantage. I have a 500hp with the only mod being a water crossover. I wanted to know what rpm i should run this motor at WOT for best results and if my rpm will change up or down with a lab finished prop.
 

·
Registered
Joined
·
5,508 Posts
speediseverything said:
Is there a rule of thumb that it will raise my rpm's when i go to the lab finished prop. 50,100. etc.
I would say generally 200 rpm is "average" but you can ask for more or less on certain props.
 

·
Registered
Joined
·
5,508 Posts
speediseverything said:
Is there any place better than the other to get my prop lab finished.
You will get different opinions on this but I don't think you can go wrong with Throttle Up or BBlades.
 
1 - 6 of 6 Posts
Top