Powerboat Forums at SpeedWake banner

headliner ?????

432 Views 4 Replies 4 Participants Last post by  speter4205
Im about to start tackling my headliner.... What is the best method for getting off the old glue residue. Its not really bad however im sure it needs to be clean in order for the new glue to stick.

does sanding work best or possibly a thinner and rag...

any ideas
1 - 5 of 5 Posts
Get a quart of adhesive remover and a lint free rag. You can get it at Home Depot.
I tried everything under the sun.

the best thing I found was goof off. Have fun, and make sure you run a good fun in there. You'll be higher then a kite. :D
use a fan to stuck out the flumes. good luck
speter4205 said:
I tried everything under the sun.

the best thing I found was goof off. Have fun, and make sure you run a good fan in there. You'll be higher then a kite. :D
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top