Powerboat Forums at SpeedWake banner
1 - 3 of 3 Posts

· Stokers Rule
Joined
·
4,378 Posts
Opening that line will allow the master cyl to drain out. Just drain it and then fill it up after re-connecting.

Open both bleeders at the wheels and keep the tongue up high with a small bottle of brake fluid upside down in the master cyl. It will gravity bleed fairly well that way, then you can pressure bleed after that if you choose.


good luck
 

· Registered
Joined
·
663 Posts
Discussion Starter · #3 ·
aquaforce said:
Opening that line will allow the master cyl to drain out. Just drain it and then fill it up after re-connecting.

Open both bleeders at the wheels and keep the tongue up high with a small bottle of brake fluid upside down in the master cyl. It will gravity bleed fairly well that way, then you can pressure bleed after that if you choose.


good luck
Thanks
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top