Powerboat Forums at SpeedWake banner
1 - 4 of 4 Posts

·
Registered
Joined
·
122 Posts
Discussion Starter · #1 ·
Maiden splash for our Cat Thursday with fresh power and rigging our Port engine shut down with in a few minutes of warm up.

Just a quick thanks to Jeff Jennings for the MSD box and coil,Tedd Link for another MSD box , Norm for the trim switch and Rudy and Wardy ward for wrenching and tuning in the Summer heat.
Had we initially run her from the ramp we would have quickly found out that we also had no trim on our Port side.
Your help was very much appreciated!
Glen AKA Crunch
 

·
Registered
Joined
·
549 Posts
I've thrown away quite a few MSD boxes over the years from some of my cars and some customers cars. The quality is of concern to me. I try to use all digital stuff now.
 

·
Registered
Joined
·
122 Posts
Discussion Starter · #4 ·
BIG MACZ said:
I've thrown away quite a few MSD boxes over the years from some of my cars and some customers cars. The quality is of concern to me. I try to use all digital stuff now.
If these engines had not been set up originally from K/E with MSD's we would have used Crane.
I ran around for hundreds of hrs with a complete spare Crane set up on the Topgun and of coarse never needed it!
 
1 - 4 of 4 Posts
Top